incl. Chain Keeper
Beschreibung
The Warmer is ideal for all types of chain waxes. It melts any
type of wax, including wax beads and wax blocks. Capacity: 500 ml
Voltage: 220-250V Frequency: 50/60 Hz Temperature range: 0-120°C
Inner container made of aluminum To prepare the device for use: 1.
Connect the device to the power supply. 2. Remove the plastic cover
from the warmer. Add wax from the can or wax drops to the warmer.
3. Switch on the heater, set the temperature unit (°C or °F) and
adjust the temperature until the wax melts. This process takes
about 15 minutes. To speed it up, close the warmer with a lid. The
higher the temperature of the wax, the faster it melts. 4. Once the
wax has melted, reduce the temperature, 5. It is important to check
the temperature of the wax before applying it and adjust if
necessary. The wax must not be too hot or too cold. 6. Continue
treating the chain. 7. After finishing the treatment, remove the
wax can from the device, switch off the device and then cover it
with the lid. 8.If you clean the device with a special agent after
disconnecting it from the power supply, when it is still slightly
warm. Caution! The inner container and wax are hot after melting!
Danger of burns!